Large Table - Instruction manual
Large Table
Instruction Manual
Included in the box for assembly
- 1 x top tub holder piece
- 1 x bottom shelf piece
- 4 x legs
- 16 x screws already pre-drilled
You will need
Drill (recommended) OR a Phillips head screwdriver
Step 1
- Start with the ‘bottom shelf piece’ and the 4 legs
Step 2
Note: The screws are already pre-drilled for your
convenience.
- If using a drill ensure it is on the slow setting and drill in
the 4 screws on each leg until they are just poking out the
other side - this will help you line up with the pre-existing
holes on the table.
Step 3
Attaching the legs
- Lay the ‘bottom shelf piece’ on its side.
Legs
‘Top tub holder piece’
‘Bottom shelf piece’
- Grab the leg with the #1 on it and line the sticker up with
the #1 on the ‘bottom shelf piece’, also lining the screws
up with the pre drilled holes.
(Example pictured left)
- If using a drill ensure it is on the slow setting and slowly
drill in the 2 screws.
- Repeat this step for all 4 legs (flip the ‘bottom shelf
piece’ over after you have put on the first 2 legs)
MAKE SURE ALL THE NUMBERS LINE UP
