2.Historical display
Press the [History] button repeatedly to display the electricity chart for the past 7 days, past 7 weeks,
and past 7 months.
Chart is only giving a brief and rough data; For precise-data Please take further view
When home applicant is connected to the Energy Meter, the data is showing the consumption data;
When the output of microinverter connected to the energy meter, the data is showing the generation
data
# Chart View
#Precise View
Long press and hold the [History] button for 3 seconds to display the precise value
Before Holding the [History] button for 3 seconds, check the display for Daily or Weekly or Monthly,
When enter precise view, accordingly the data will be for Daily or Weekly or Monthly.
Power Data in the past 7 days
When in Daily Data Chart, 1BAR=1KWh indicates that 1
st
horizontal line represents 0.1~1.0KWh,
and 2
nd
horizontal line represents 1.1~2.0KWh,etc…
Power Data in the past 7 weeks
When in Weekly Data Chart, 1BAR=3KWh represents 1
st
horizontal line representing 0.1~3KWh,
and 2
nd
horizontal line represents 3.1-6.0KWh displays two horizontal lines,etc…
Power Data in the past 7 months
When in Monthly Data Chart, 1BAR=10KWh represents 1
st
horizontal line representing 0.1~10KWh,
and 2
nd
horizontal line represents 10.1-20.0KWh displays two horizontal lines,etc…
Warning: For the purpose of safety, the Pre-set overload alarm wattage should be less than
3680W.
3.Cost and time display
Press the [Cost] button repeatedly to display in sequence:
Please refer to the second row on the display;
Clock: display the current time.
Press the [Set] button for 3 seconds to enter the clock setting.
Press the [+] or [-] keys to adjust the number.
Press the [History] key to switch between digit positions.
Press the [OK] key to complete the settings and exit.
Press the [History] and [Energy] buttons simultaneously for 3 seconds, and select the 12/24 hour
display.
Total power time
Display the total operating time when the power of the connected electrical appliance is greater than 1W.
Note:
In the first hour, the second row displays: first 2 numbers to be minutes and second 2 numbers
to be seconds.
Afterwards, the second row displays: first 2 numbers to be hours and second 2 numbers to be minutes.
Total power data
Total cost/Income
Note:
When the rate is equal to 0 or pending for preset, the data will not be included.
Rate display and settings
This machine has two modes: single rate/tariff and double rate/tariff.
3
2
TOTAL TIME
TOTAL
Press the [+] or [-] keys to view the precise value of total electricity
consumption in the past 1-7 days/week/month.
TOTAL
TOTAL
TARIFF 1
TIME
TOTAL
COST
