12
Anti-tip
Devices
Long Screw
Short Screw
Short Screw
Long Screw
Metal Bracket
Metal
Bracket
Metal
Bracket
Wall Anchor
Step 6:
Hardware
Used:
ASSEMBLY INSTRUCTIONS
Actual Size
Actual Size
STUD
Warning
Children can be severely injured by tipping
furniture.
It is imperative that the tipping restraint
hardware be installed to prevent the unit
from tipping over, potentially causing injury
or even fatality.
1. Use the short screw install the metal
bracket on the reverse side of the lower
shelf (C), find the stud position and put the
unit against the stud. Use a pencil to mark
the holes by the metal bracket. Be careful
to avoid any studs, wires or anything else
behind the wall.
2. Use the electric drill with 3/16” (5 mm)
drill bit to drill holes to the wall.
3. Tap the wall anchor to the holes flush to
the wall.
4. Use the long screw cross the metal
bracket tighten into the wall anchor.
Assembly of the anti-tip device
STUD
STUD
1
2
3
4
Wall Anchor
C
B
Page 7
