manualshive.com logo in svg

Off-Grid energy Standalone Power Essential System, User Manual, Page: 7 / 29

Share
Download
Off-Grid energy Standalone Power Essential System User Manual Download Page 7

Standalone Power : Essential System™ : User Manual 

Copyright © 2014 Off-Grid Energy Australia Pty Ltd 

 

6   

Safety Warnings 

 

 

 

WARNING 

Your standalone power system produces 230-volt AC power. Risk of lethal or serious injury from electric 
shock can occur if mains voltage equipment is mishandled, modified, opened without authorisation, or if AC 
wiring is installed or extended by unqualified personnel.

 

 

 
 
Generator sets usually produce 240 Volt AC power; a risk of lethal or serious injury from electric shock can 
occur if a generator is mishandled or modified.  A risk of lethal or serious injury from burns can occur if 
generator fuel is mishandled.  A risk of lethal or serious injury from carbon monoxide poisoning can occur if 
generator exhaust gasses are inhaled.  Always follow the generator manufacturer’s safety instructions. 
 
Do not climb on a roof without height safety training and using the appropriate safety equipment.  
 
Do not interfere with solar array wiring; ELV class voltage up to 120 Volts DC may be present which can 
deliver an electric shock, although a shock from this class of voltage would not normally be lethal it can 
cause a person to fall from a height and sustain lethal or very serious injury. 
 
An Extra Low Voltage class battery bank if mishandled or short circuited can cause extremely high current 
discharges which can cause severe burns; eye injury or death from a resulting fire or explosion. Keep all 
metal objects and fuel away from battery banks; do not interfere with battery banks without sufficient 
training and authorisation.  
 
Please carefully read and follow further safety advice in this document; in addition always read and follow 
the equipment manufacturer’s safety instructions; please contact OEA for advice if you have any questions 
about safety issues.  

Manufacturers User Manuals 

 
In addition to this user manual, we highly recommend you take the time to read all the equipment 
manufacturer’s user manuals supplied with relevant equipment. Please keep all manuals together in a safe 
place near the equipment where they can be readily consulted if needed. 
 

 

Summary of Contents for Standalone Power Essential System






























Reviews:

No comments