6
Preparation for use
The
Easybike
is supplied configured according with the order form selection to
ensure the most convenient setup to match the customer needs. In order to be
properly connected to a specific wheelchair, therefore, some additional adjustments
may be required.
Please follow this manual instructions perform the final set-up of the device to
match your wheelchair.
Matching the EASYBIKE with the wheelchair
Before matching the Easybike with the wheelchair consider that you can modify the
position of the fastening pipe and adjust the position of the fastening clamp.
If necessary, loosen the clamp by opening the cam lever to adjust the fixing tube.
Pull out the tube and place it on the chosen spot. Once placed it lock the clamp by
closing the cam lever.
Summary of Contents for EASY-BIKE
