OETIKER CAL 02, Operating Instructions Manual, Page: 4 / 33

Operating Instructions
Test Equipment
OETIKER CAL 02
www.oetiker.com Operating Instructions English Edition 02.09 08901805
4
EN
G
LI
SH
Introduction
Validity
These operating instructions are valid for Test Equipment CAL 02. The operating instructions of the dial gauge also
apply and must be observed.
Proper use
The Test Equipment CAL 02 is intended exclusively for verifying the closing force of OETIKER installation tools. Any
other use is considered to be "improper use". Improper use includes, for example, checking the force of tools for which
the Test Equipment CAL 02 has not been approved, and/or checking the force of tools which are not OETIKER
products. The Test Equipment CAL 02 must not be used for imparting blows (as a hammer) or otherwise as a manual
tool. The manufacturer is not liable for any damage resulting from improper use or incorrect operation.
Delivery scope
Version 1 – with MarCator 1087 dial gauge* Item no. 13600243
* Electronic data exchange possible
- Closing force sensor (SKS 02),
fitted with closing force lugs 10 mm wide (SKB 10) 13600242
- MarCator 1087 dial gauge 05006097
- Hexagon key, 2.5 mm A/F 08901832
- Hexagon key, 3 mm A/F 08901808
- Operating instructions 08901805
- Case 08901807
- Loctite 243 adhesive, 5g 08901482
Version 2 – with MarCator 1081 dial gauge** Item no. 13600244
** No electronic data exchange
- Closing force sensor (SKS 02),
fitted with closing force lugs 10 mm wide (SKB 10) 13600242
- MarCator 1081 dial gauge 05006096
- Hexagon key, 2.5 mm A/F 08901832
- Hexagon key, 3 mm A/F 08901808
- Operating instructions 08901805
- Case 08901807
- Loctite 243 adhesive, 5g 08901482
Version 3 – without dial gauge Item no. 13600245
- Closing force sensor (SKS 02),
fitted with closing force lugs 10 mm wide (SKB 10) 13600242
- Hexagon key, 2.5 mm A/F 08901832
- Hexagon key, 3 mm A/F 08901808
- Operating instructions 08901805
- Case 08901807
- Loctite 243 adhesive, 5g 08901482
Technical data
Closing force sensor SKS 02
Closing force range: 500 N – 10 000 N
Dimensions: ca. 77 x 18 x 46 mm
Weight: ca. 245 g
Accuracy of SKS 02 with MarCator 1087 dial gauge: +/- 200 N
Accuracy of SKS 02 with MarCator 1081 dial gauge: +/- 200 N
Closing force sensor SKS 02 - with closing force lugs SKB 10 (SKB 10-set: item no. 13600058)
Closing force range: 500 N – 7 500 N
Ultimate load: 10 000 N
Jaw spacing for measurement: 6.5 mm +/- 0.5 mm
Dimensions: ca. 84 x 18 x 46 mm
Jaw width: 10 mm