background image

 3 
 

1. 

Introduction

 

By buying the OERTZEN equipment you have purchased one of the most 
durable and reliable high pressure cleaners available on the market. Its 
balanced ratio of water flow (temperature) and working pressure perfectly 
meets all cleaning requirements. The OERTZEN high pressure cleaners and 
accessories conform to all European safety regulations which is guaranteed by 
the CE symbol on the type plate. A Declaration of Conformity is part of this 
manual. 
 

  This manual to be made available to the operating personnel and to be 

read completely before start-up. We point out that we cannot be held 
responsible for any damage or malfunctions as a result of neglecting 
this manual. 

 

  According to the Directive for Use of Liquid Blasters (ZH 1/406) the 

machine described in this manual to be inspected every year by 
qualified personnel. Inspection results to be recorded and to be made 
available to authorities their on request. OERTZEN offers qualified 
service personnel to carry out safety inspections at attractive prices. 

 

  The packing materials (plastic foil, wood, cardboard boxes, nails etc.) 

are potentially dangerous, should be kept away from children and 
disposed according to environmental requirements.

 

 

This symbol appears at all operating and safety instructions 
dealing with risks for personal entirety and life. 
 
This warning symbol appears in the operating manual at all 
operating safety instructions dealing with risks due to electric 
power. 

 

 
This warning symbol appears in the operating manual at all 
operating safety instructions dealing with risks due to electric 
power. 

 

This symbol appears at all operating and safety instructions 
dealing with the fulfilment of rules, regulations and instructions for 
the proper operation and destruction of the machine. 
 
This manual is subject to technical alteration. 

 
All rights reserved. Any use in other than legally authorised cases requires the 
written approval of ARNDT H. von OERTZEN (GmbH&Co). 
 
 
 

 

 

 

 

Summary of Contents for M 500

















Reviews: