1 Mounting instructions
1.1 Safety
1.1.1 Notes for the Operating Company
Read these assembly instructions before starting up the pump.
1.1.2 Operating Instructions of the operating company
As employer you are obliged to draw up safe operation instructions for your
company.
This applies especially when components, such as pumps / pump units, are
supplied for a line / machine and the supplied assembly instructions are component
specific. The following sections are meant to facilitate the procedure of drawing
up your own Operating Instructions.
In addition, you can order a service manual for any type of pump from Barmag.
Barmag also supplies training for service activities.
1.1.3 Intended Use
The spin-finish pump is intended for metering low-viscosity liquids (mostly spin-
finish liquid) up to approx. 40 cST.
Operate the pump only within the limits specified in the pump specifications sheet
(see information in
For safety reasons, no other or additional use is allowed. Any other use may lead
to increased risks for the operating personnel.
Intended use includes the observance of the assembly instructions, especially of
the repair instructions.
1.1.4 Qualifications of Personnel
Use only trained personnel for commissioning, operating, and maintenance of
the pump / pump unit.
Maintenance or repair of electrical components must only be performed by qual-
ified electricians.
1.1.5 Notes on Commissioning
After completing the installation and before each recommissioning of the pump /
pump unit, you must carry out a test run including a check of the process para-
meters and all safety devices.
1.1.6 Operation and maintenance
Do not change or convert the pump / pump unit without the express approval of
Barmag. Failure to do so makes the entire warranty null and void. Inspection,
maintenance, and repair activities may only be carried out by trained personnel.
1
Translation of the assembly instructions, V16
10/2022 1-007-3296
TDD-00019389
GF
Spin-finish pump
1 Mounting instructions
