3
Operating Instructions and Parts Manual
24861
12/18
2018 OEMTOOLS
™
WASTE OIL DRAIN
DISPOSAL
At the end of the useful life of the Waste Oil Drain, dispose of the
components according to all local, state, and federal regulations.
PURPOSE
The Waste Oil Drain is designed for the collection of used fluids
including motor oil, transmission fluid, and coolant from under lift-
mounted vehicles.
The portable oil drain system is designed to safely capture oil and
other vehicle fluids with the use of a large funnel. After use, the drain is
emptied using air pressure.
An external air supply is required to run the drain.
PRODUCT SPECIFICATIONS
Reservoir Capacity
80L (21 Gallons)
Discharge Hose Length
70"
Oil Drain Funnel Diameter
15"
Oil Drain Extension Diameter
22"
Funnel Height Adjustment
45" – 62"
Caster
3-1/2" (2 Swivel,
2 Swivel with Lock)
Max Air Pressure
7 PSI (0.5 Bar)
NOTE:
Not all components of the Waste Oil Drain are replacement
items, but are illustrated as a convenient reference for location and
position in the assembly sequence.
OPERATION
CAUTION
1. This equipment is intended only for professional use by personnel
trained in performing the service functions for which it is designed.
2. This equipment is designed for servicing a variety of vehicles in a
safe, convenient manner. However, differences in vehicle makes
and models could make it impossible to use this equipment as it is
intended. DO NOT attempt to force the use of this equipment on an
application for which it is not designed to perform.
3. The procedures documented in this manual are to serve as guidelines
for the use of this equipment.
4. In addition to these guidelines, always follow the manufacturer’s
recommended procedures when servicing each unique vehicle.
5. The use of this equipment is simple and straightforward if you follow
the instructions. However, always keep in mind that you are working
with a system that may be under pressure, with fluid that is just
waiting to be expelled. When operating this equipment, use common
sense and always stop to think before disconnecting a hose or other
component.
6. Always use the Waste Oil Drain on a flat, level surface and lock the
casters before using.
Waste Oil Drain
Figure
Description
1
Oil Drain Extension Diameter
2
Oil Drain Funnel Diameter
3
Pressure Gauge
4
Safety Valve
5
Release Valve
6
Central Drain Tube
7
Air Fitting
8
Waste Oil Discharge Hose
9
Waste Oil Discharge Valve
10
Caster (with brake)
11
Caster (no brake)
12
Pressure Valve (not shown)
13
Main Valve
10
11
13
5
9
8
7
3
6
2
1
