2
Operating Instructions and Parts Manual
24861
12/18
2018 OEMTOOLS
™
WASTE OIL DRAIN
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your tool. Read this manual carefully. Learn the tool’s
applications and limitations, as well as potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark work areas invite
accidents.
3. Keep children away. All children should be kept away from the work
area. Never let a child handle a tool without strict adult supervision.
4. DO NOT operate this tool if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment
or reflexes are impaired while taking drugs. If there is any doubt, do
not attempt to operate.
5. Use safety equipment. Eye protection should be worn at all times
when operating this tool. Use ANSI approved safety glasses.
Everyday eyeglasses are NOT safety glasses. Dust mask, non-skid
safety shoes, hard hat or hearing protection should be used in
appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves, neck-ties, rings,
bracelets or other jewelry may present a potential hazard when
operating this tool. Keep all apparel clear of the tool.
7. DO NOT overreach. Keep proper footing and balance at all times
when operating this tool.
8. Check for damage. Check your tool regularly. If part of the tool is
damaged, it should be carefully inspected to make sure that it can
perform its intended function correctly. If in doubt, the part should be
repaired. Refer all servicing to a qualified technician. Consult your
dealer for advice.
9. Keep away from flammables. DO NOT attempt to operate this tool
near flammable materials or combustibles. Failure to comply may
cause serious injury or death.
10. Store idle tools out of the reach of children and untrained persons.
Tools may be dangerous in the hands of untrained users.
11. Maintain tools with care.
12. Keep tools dry and clean.
13. Properly maintained tools are less likely to bind and are easier to
control. DO NOT use a damaged tool. Tag damaged tools “DO NOT
Use” until repaired.
14. Check for misalignment or binding of moving parts, breakage of
parts, and any other condition that may affect the tool’s operation.
15. If damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
16. Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one tool may
become hazardous when used on another tool.
17. Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could
result in a risk of injury.
18. When servicing a tool, use only identical replacement parts. Use of
unauthorized parts or failure to follow maintenance instructions may
create a risk of injury.
19. Maintain a safe working environment. Keep the work area well lit.
Make sure there is adequate surrounding workspace. Keep the
work area free of obstructions, grease, oil, trash, and other debris.
DO NOT use this product in a damp or wet location.
INSTRUCTIONS SPECIFIC TO THIS PRODUCT
1. Maintain labels and nameplates on this product. These carry
important information. If unreadable or missing, contact OEMTOOLS
for a replacement.
2. Keep the handle dry, clean, and free from brake fluid, oil, and grease.
3. Before use, read and understand all warnings, safety precautions, and
instructions as outlined in the vehicle manufacturer’s service manual.
It is beyond the scope of this manual to properly describe the correct
procedure and test data for each vehicle.
4. Always perform vehicle service in a properly ventilated area. Never
run an engine without proper ventilation for its exhaust. Stop work
and take necessary steps to improve ventilation in the work area if
you develop momentary eye, nose, or throat irritation as this indicates
inadequate ventilation.
5. Engine parts that are in motion and unexpected movement of a
vehicle can injure or kill. When working near moving engine parts,
wear snug fit clothing and keep hands and fingers away from moving
parts. Keep hoses and tools clear of moving parts. Always stay clear
of moving engine parts. Hoses and tools can be thrown through
the air if not kept clear of moving engine parts. The unexpected
movement of a vehicle can injure or kill. When working on vehicles,
always set the parking brake or block the wheels.
6. Be alert for hot engine parts to avoid accidental burns.
7. If you drove your car recently, fluids could be very hot. Allow at least
2 hours before you handle any fluids. Oil and Coolant burns are very
dangerous.
8. Avoid accidental fire and/or explosion. DO NOT smoke near engine
fuel and battery components.
9. Never remove the cap from the radiator or expansion tank while the
engine is at operating temperature.
10. Always allow the engine to cool before removing the radiator cap or
expansion tank cap. The cooling system is under pressure. Failure to
allow the engine to cool before attempting to remove the cap could
result in serious injuries.
11. DO NOT misuse, over-pressurize, modify parts, or use worn and/or
damaged parts.
12. DO NOT use oil drain for flammable or caustic fluids.
13. DO NOT exceed 7 psi (0,5 bar) air pressure when emptying the oil drain.
14. The warnings, precautions, and instructions discussed in this manual
cannot cover all possible conditions and situations that may occur.
The operator must understand that common sense and caution are
factors which cannot be built into this product, but must be supplied
by the operator.
15. For safety purposes and the prevention of damage to expensive
components, it is advised that the user understand basic automotive
repair and have a working knowledge of automotive systems.
16. We believe the information contained herein to be reliable. However,
general technical information is given by us without charge and the
user shall employ such information at his or her own discretion and
risk. We assume no responsibility for results or damages incurred from
the use of such information in whole or in part. Always refer to specific
instructions and technical information supplied by vehicle manufacturer.
17. The manufacturer declines any and all responsibility for damage
to vehicles or components if said damage is the result of unskillful
handling by the operator or of failure to observe the basic safety rules
set forth in the instruction manual.
18. Used oil, antifreeze, brake fluid and transmission fluid contain
chemical compounds that can be harmful to humans and animals.
When managed properly, used oil may again be of beneficial use.
Used oil may be blended and recycled as a heating or industrial fuel
and also may be re-refined and made into new lubricants. Persons
who perform maintenance on their own vehicles are responsible
for managing the used fluids in a manner that is protective of
human health and the environment and to follow all local laws and
regulations concerning their disposal.
