background image

UNPACKING

After unpacking unit, inspect 
carefully for any damage that may 
have occurred during transit. Check 
for loose, missing, or damaged 
parts. If any damage is observed, 
a shipping damage claim must 
be filed with carrier.  Do not use 
Transmission Jack if broken, 
bent, cracked or damaged parts 
(including labels) are noted.  Any 
Transmission Jack that appears 
damaged in any way, operates 
abnormally or is missing parts 
should be removed from service 
immediately.  If you suspect that the 
Transmission Jack was subjected 
to a shock load (a load that was 
dropped suddenly, unexpectedly, 
etc.) immediately discontinue use 
until it has been checked by a 
factory authorized service center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect 
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions 
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.

Operating Instructions and Parts Manual 

24843

08/14

2014 ©OEM-TOOLS

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

[email protected]

FLOOR TRANSMISSION JACK

Explanation of Safety Signal Words

CAUTION

Notes

CAUTION

WARNING

The following safety information is provided as guidelines to help you operate your Floor Transmission Jack under the 

safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe 

handling instructions are not known or not followed. The following safety instructions are to provide the user with the 

information necessary for safe use and operation. Please read and retain these instructions for the continued safe use 

of your service system. Failure to follow instructions listed below may result in serious injury. In addition, make certain 

that anyone that uses the equipment understands and follows these safety instructions as well.

WARNING

: Indicates a potentially hazardous situation which, if not avoided, could result in death or 

serious injury.

: Indicates a potentially hazardous situation which, if not avoided, may result in minor or 

moderate injury.

: Used without the safety alert symbol indicates a potentially hazardous situation which, if 

not avoided, may result in property damage. 

: Provide clarity and helpful information.

Summary of Contents for 24843








Reviews: