3
Operating Instructions and Parts Manual
24685
5/20
2020 OEMTOOLS
®
12V LITHIUM-ION 3/8" SQUARE DRIVE
CORDLESS POWER RATCHET
4. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY INSTRUCTIONS
WARNING
: Know your cordless ratchet. DO NOT plug
in the charger or install the battery in the tool until you
read and understand this Instruction Manual. Learn the
tool’s applications and limitations, as well as the specific
potential hazards related to this tool. This will reduce the
risk of electric shock, fire, or serious injury.
WARNING
: Always wear eye protection. Any power
tool can throw foreign objects into your eyes and cause
permanent eye damage. ALWAYS wear safety goggles
(not glasses) that comply with ANSI safety standard
Z87.1.
WARNING
: To avoid fire or toxic reaction, never use
gasoline, naphtha, and acetone, paint thinner or similar
highly volatile solvents to clean the tool.
1. Use only accessories that are recommended for
this cordless ratchet. Follow the instructions that
accompany the accessories. The use of improper
accessories may result in injury to the operator or
damage to the tool.
2. If any part is missing or damaged, DO NOT plug the tool into
the power source or install any accessory until the missing or
damaged part is replaced.
3. Avoid awkward hand positions where a sudden slip
could cause your hand to move into the path of the
tool.
4. To avoid injury from accidental starting, always remove
the battery from the tool before installing or removing
an accessory.
5. It is recommended that impact sockets and
accessories are used with this tool. Never use
accessories that are not ANSI compliant.
6. Always check sockets and accessories for damage
or excessive wear. Worn accessories may cause an
unsafe working environment.
7. Never use this product in place of a torque wrench.
8. Keep the handle and body clean and free of oil and
grease. Always use a clean dry cloth when cleaning.
DO NOT use solvents, brake fluid, gasoline, or other
petroleum products to clean the tool. They will damage
the tool.
9. When wearing gloves, they must be tight fitting and slip
resistant. Leather gloves offer the best protection.
10. Always use two hands when operating this tool. Use
one hand on the handle and the other on the front of
the tool body.
11. Never place your hand so it is touching the socket or
accessory when the tool is turned ON.
12. Be ready for components to shift when removing any
fastener. The speed of the fastener removal could
cause unexpected shifting of the components.
13. DO NOT disassemble this tool. Take it to a qualified
professional when service or repair is required.
Incorrect reassembly may result in electric shock or fire.
14. Always charge the battery pack indoors in a well-
ventilated area. The charger must never be subjected
to wet conditions.
15. This tool vibrates. Repeated or long-term use can
cause temporary or permanent injury in hands, wrists,
arms, and shoulders. If there is any concern, always
reach out to a medical professional prior to use.
PURPOSE
The OEMTOOLS
®
12V Lithium-ion 3/8" Square Drive
Cordless Power Ratchet is used for tightening or
loosening nuts and bolts, automotive repair, body shop
maintenance, and other applications.
PRODUCT SPECIFICATIONS
Drive
3/8" Square Drive
Speed (No Load)
230 RPM
Max Powered Torque
35 Ft/Lb. (47 N•m)
Max Manual Torque
96 Ft/Lb. (130 N•m)
Battery
12V / 2.0 Ah Li-ion
Weight
1.9 Lbs.
Charge Time
5-6 Hrs. (7 Hrs. Full Charge)
CONTENTS
(1) Power Ratchet, (1) 12V / 2.0 Ah Li-ion Battery,
(1) Charger, (1) Blow Mold Storage Case
INSTRUCTION
1. Install the correct socket or accessory to the tool. Make
sure the accessory is fully engaged and not damaged.
Impact rated sockets and adapters are recommended.
2. Use the direction lever on the back of the ratchet head to set
the rotational direction desired.
3. Insert the fully charged battery into the handle of the
tool. Ensure the battery is fully engaged; there will be a
slight “click”.
4. Place the socket onto the fastener to be removed/
installed.
5. Slide the lock switch UP, to unlock the ratchet.
NOTE
: Always check the vehicle maintenance manual for
torque requirements. This tool is not a torque wrench and will
overtighten low torque fasteners.
6. Hold the tool with both hands and squeeze the trigger.
NOTE
: When tightening fasteners, DO NOT let the tool lock
out for more than 2-3 seconds. This can cause damage to the
fastener and/or tool.
7. Remove the tool from the fastener. Slide the lock
switch DOWN to lock the ratchet.
