3
Operating Instructions and Parts Manual
24476
5/17
2017 OEMTOOLS
™
COMMERCIAL GRADE 18000 mAh LI-ION
JUMP STARTER AND POWER BANK
WARNING
: This product contains rechargeable lithium-ion
batteries. Lithium batteries are potentially hazardous and can present
a serious FIRE HAZARD if damaged, defective or improperly used.
Larger lithium batteries and those used for industrial use involving
high discharge current and frequent full discharge cycles require
special precautions. User assumes all risk associated.
WARNING
: RISK OF IGNITING EXPLOSIVE GASES WHILE
WORKING WITH, AND IN THE AREA OF, A LITHIUM OR LEAD-ACID
BATTERY IS DANGEROUS. BATTERIES GENERATE EXPLOSIVE
GASES DURING NORMAL OPERATION. IT IS IMPORTANT THAT YOU
FOLLOW THESE INSTRUCTIONS EACH TIME YOU USE THE UNIT.
PRODUCT DESCRIPTION
The OEMTOOLS
™
Commercial Grade 18000 mAh Li-Ion Jump
Starter and Power Bank jump starts cars, charges phones, tablets
and personal electronics.
PRODUCT SPECIFICATIONS
Capacity:
18000mAh/66.6Wh
Start Current:
450A
Peak Current:
900A
Charging Port Output:
5V/2.1A (min 80mA)
Input:
5V/2.1A(max)
Size:
7.9” x 3.8” x 1.7” (L x W x H)
Weight:
28 Oz.
SPECIFIC SAFETY INSTRUCTIONS AND WARNINGS
1. DO NOT put fingers or hands into any of the power source’s
outlets.
2. DO NOT expose the power source to rain or snow.
3. Use only recommended attachments. Use of an attachment
not recommended or sold by OEMTOOLS
™
may result in a
risk of fire, electric shock or injury to persons or damage to
property.
4. To reduce the risk of damage to the electric plug or cord, pull
by the plug rather than the cord when disconnecting the unit.
5. DO NOT operate the unit with damaged cables or clamps.
6. Never attempt to modify or alter unit, cables or accessories;
this can result in permanent damage to unit, electric shock,
and/or personal injury and property damage.
7. DO NOT disassemble the unit. Contact OEMTOOLS
™
at 1-800-
457-0600 for instruction. Incorrect reassembly may result in a
risk of fire or electric shock.
WARNING
: Risk of explosive gases.
8. To reduce the risk of a battery explosion, follow these
instructions and those published by the battery manufacturer
and the manufacturer of any equipment you intend to use in
the vicinity of the battery. Review the cautionary markings on
these products and on the engine.
9. DO NOT set the unit on flammable materials, such as
carpeting, upholstery, paper, cardboard, etc.
10. DO NOT use the unit to jump start a vehicle while charging the
internal battery.
WARNING
: RISK OF EXPLOSIVE GASES. A SPARK NEAR THE
BATTERY MAY CAUSE A BATTERY EXPLOSION.
TO REDUCE THE RISK OF A SPARK NEAR THE BATTERY:
1. NEVER smoke or allow a spark or flame in the vicinity of a
battery or engine.
2. Remove personal metal items such as rings, bracelets,
necklaces and watches when working with a lithium or lead-
acid battery. A battery can produce a short circuit current high
enough to weld a ring to metal, causing a severe burn.
3. Be cautious to reduce the risk of dropping a metal tool onto
the battery. It might spark or short-circuit the battery or other
electrical part that may cause an explosion.
4. Do not permit the internal battery of the unit to freeze. Never
charge a frozen battery.
5. To prevent sparking, NEVER allow clamps to touch together or
contact the same piece of metal.
6. Always have someone nearby to come to your aid when you
work near a lead-acid battery.
7. Have plenty of fresh water, soap and baking soda nearby for
use, in case battery acid contacts your eyes, skin, or clothing.
8. Wear complete eye and body protection, including safety
goggles and protective clothing. Avoid touching your eyes
while working near the battery.
9. If battery acid contacts your skin or clothing, immediately
wash the area with soap and water. If acid enters your eye,
immediately flood the eye with cold running water for at least
10 minutes and get medical attention right away.
10. If battery acid is consumed, DO NOT induce vomiting. Seek
medical attention immediately.
11. Neutralize any acid spills thoroughly with baking soda before
attempting to clean up.
BEFORE USE PRECAUTIONS AND PREPARATIONS
WARNING
: RISK OF CONTACT WITH BATTERY ACID. BATTERY
ACID IS A HIGHLY CORROSIVE SULFURIC ACID.
1. Make sure the area around the battery is well ventilated while
the unit is in use.
2. Clean the battery terminals before using the jump starter.
During cleaning, keep airborne corrosion from coming into
contact with your eyes, nose and mouth. Use baking soda
and water to neutralize the battery acid and help eliminate
airborne corrosion. Do not touch your eyes, nose or mouth.
3. Determine the voltage of the battery by referring to the vehicle
owner’s manual and make sure that the output voltage of the
Jump Starter is correct.
4. Make sure that the power source cable clamps make secure
connections.
