3. Unpacking and Installation
24-Port 10/100M Ethernet PoE Switch/AT Rev 1.0 05/30/2011 Page
Open the received cartons
of the
24-ports 10/100 Ethernet PoE
Switch
and carefully
unpack its contents. The cartons should Included following
items:
One
24-Ports 10/100M Ethernet PoE Switch.
One AC power cord.
Four rubber feet with adhesive backing.
Mounting kit (two brackets and screws)
Quick Installation Guide.
If any item is found missing or damaged,
please contact your local reseller for replacement.
24-Port 10/100M Ethernet PoE Switch Rev 1.0 04/10/2012 Page 3 / 8
•
Installation:
The installation of the
24-ports 10/100 Ethernet PoE Switch
requires the following steps:
A computer with a 10/100Base-T network adapter installed.
The surface must support at least 6.0Kg (13.2 lbs) for the switch.
The power outlet should be within 1.5 meters (5 feet) of the switch.
Visually inspect the AC power cord and make sure that is fully secured to the power outlet.
Make sure that there is proper heat dissipation from and adequate ventilation around the
switch. Do not place heavy objects on the switch.
4. System Requirements
