1. Introduction
The
24-Ports10/100M Ethernet PoE Switch
combines a high efficiency 24-ports 10/100Mbps Ethernet switch and a
standard 802.3af 24-ports Power over Ethernet (PoE) capability. The
24-Ports 10/100M Ethernet PoE Switch
incorporates an internal 48VDC power supply. Each of the PoE Ethernet ports can support 15.4 Watts of power as
well as 10/100M data transmission over the Inter- connecting Ethernet interface such as Cat 5/ 5e /6 cables.
The
24-Ports 10/100M Ethernet PoE
Switch
is a Power Source Equipment (PSE) and fully compatible with Powered
Devices (PD) that comply with the IEEE 802.3af PoE standard. The
24-Ports 10/100M Ethernet PoE Switch PoE
Switch
enables users to attach IEEE802.3af compliant devices such as wireless Access Points (APS), VOIP phone,
IP camera, printer and Network Attached Storage (NAS) directly to the
24-ports 10/100 Ethernet PoE
Switch without
requiring additional power on the network. The unit is designed for home and small business users in mind and is ideal
for installations where AC power is not available or no cost-effective.
No configuration is required and installation is quick and easy. Support for Auto
– MDI / MDI-X on all of the ports
eliminate the need for crossover connection to another switch or HUB. Auto - Negotiation on each port senses the
link speed of a network device ( either 10 or 100) and intelligently adjusts for compatibility and optimal performance.
* 1-Year Limited Warranty for switch and 1-Year Limited Warranty for the power adaptor are available
* This device is designed for indoor use. Do not use outdoors.
* included are the installation manual.
24-Port 10/100M Ethernet PoE Switch Rev 1.0 04/10/2012 Page
2 / 8
•
Power Over Ethernet (PoE):
Power over Ethernet (PoE) integrates 48V power and data onto one single cable, eliminating the need to have
AC power available at all equipment locations. Power and Data are integrated onto the same cable, supporting
category 5/5e up to 100 Meters. PoE provides power to PoE compatible devices, such as VOIP telephones,
wireless LAN access points, and IP security cameras.
PoE device are ready in the market, saving up to 50% of overall installation cost by eliminating the need to install
separate electrical wiring and power outlets.
•
Features:
24 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 24-Ports PoE function ( port 1 ~ port 24).
Compliant with IEEE 802.3af(24-Port 10/100M Ethernet PoE Switch).
Supports PoE power up to 340W for all PoE ports.
Supports PoE IEEE802.3af compliant Powered Device (PD)
Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
Full/half duplex transfer mode for each port.
Wire speed reception and transmission.
Up to 4K unicast address entities per device. Self-learning, and table aging.
64KBytes packet buffer.
2.
Power over Ethernet (PoE) & Features
