A.3 Commands and Response
Appendix A-103
Notes of Figure A.3.5;
1)
The CONTROL command can be issued more than once.
2)
The document size reported in *2 is the same as that reported in *1.
3)
The CONTROL command must not be issued between the READ command for front-side reading
and START command for back-side reading. The issued command is ignored when this is done. If
necessary, the CLEAR command that stops reading data must be issued before the command is
issued. Paper is ejected when the CLEAR command is issued.
4)
IMAGE MODE SENSE is not necessarily issued.
A.3.6
Command/Response Correspondence
(1)
Initialization was completed normally.
(2)
The command was destroyed by a transmission error.
(3)
Equipment abnormality was detected during initialization.
Normal
Abnormal
Response
Command
Ready
Normal
status
Read
com-
plete
Image
status
Unit
status
Opera-
tion
error
Tempo-
rary
error
Equip-
ment
error
CLEAR
(1)
(2)
(3)
CONTROL
(4)
(5)
IMAGE.CTL
(4)
(5)
SUB.W.CTL
(4)
(5)
START
(6)
(8)
(9)
(14)
READ
(7)
(8)
(9)
(10)
SENSE
(11)
(12)
(13)
(14)
RETURN
SENSE
(15)
(8)
(14)
IMG.MODE
SNS
(4)
(8)
(14)
SEND DITHER
(4)
(5)
INQUIRY
(4)
(5)
Summary of Contents for M3097DE
