5.2 Setup
report
The following
fi
gures show the setup reports of the printer. The shown values for parameters are sample values; for
the list and the description of printer and Ethernet parameters see the following paragraphs.
PRINTER SETUP
INTERFACE ......................................... RS232
PROGRAM MEMORY TEST................ OK
DYNAMIC RAM TEST.......................... OK
EEPROM TEST.................................... OK
CUTTER TEST..................................... OK
PRINTER HEAD Rav ........................... 800
HEAD VOLTAGE
[V]
= 24.55
HEAD TEMPERATURE
[°C]
= 26
PWM EJECTER
[%]
= 66.4
PAPER PRINTED
[cm]
= 3590
CUT COUNTER
= 35
RETRACT COUNTER
= 0
POWER ON COUNTER
= 70
RS232 Baud Rate .......................... :
115200 bps
RS232 Data Length ........................ :
8 bits/chr
RS232 Parity .................................. :
None
RS232 Handshaking ...................... :
Xon/Xoff
Busy Condition ............................... :
RxFull
USB Address Number .................... :
0
USB Status Monitor........................ :
Enabled
Autofeed ......................................... :
CR disabled
Print Mode ...................................... :
Normal
Chars / inch .................................... :
A=16 B=23cpi
Speed / Quality............................... :
Normal
Automatic Ejecting.......................... :
Disabled
Paper Retracting ............................ :
Disabled
Paper Width.................................... :
200 mm
Dot Damage Prevention ................. :
Disabled
Paper Threshold ............................. :
30%
Notch Alignment ............................. :
Enabled
Notch/B.Mark Threshold................. :
40%
Notch Distance [mm] ...................... :
+00.0
Short ticket (<150mm) .................... :
Disabled
Print Density................................... :
0%
[FF]
enter Setup
[LF]
enter skip Setup
KPM216H rel
1.00
PRINTER NAME and
FIRMWARE RELEASE
KEYS FUNCTIONS
(see paragraph 2.4)
PRINTER STATUS
(see paragraph 5.3)
PRINTER PARAMETERS
(see paragraph 5.4)
5. CONFIGURATION
User manual
KPM216HII 39
Summary of Contents for KPM216HII
