manualshive.com logo in svg

OEM IPX7A-ION, Reference Manual

Share
Download
OEM IPX7A-ION Reference Manual Download Page 23

IPX7A-ION Motherboard Reference Guide

23

8  BIOS Setup reference

Advanced

Fan Control

This item allows you to enable or disable the Fan Control feature that automatically 

adjusts the fan speeds for more efficient system operation. 
Default: [Enabled] / Options: [Disabled] [Enabled]

Initial/Idle Fan Voltage

   

Display field only 

[x.xxx V]

Acceleration Starts at

   

Display field only

 [xxxºC/xxx

º

F]

PWM Ramp Range 

 

Display field only 

[xxx ºC]

Switches to Full Speed at 

Display field only 

[xxxºC/xxx

º

F]

Fan Control Mode

This item allows you to choose how your fan is controlled.

Default: [Auto] / Options: [Auto]

  Onboard Device Configuration

Onboard VGA Configuration

This item allows you to configure your VGA settings.

Primary Graphics Adapter

Default: [PCIE VGA Card First] / Options: [Internal VGA First] [PCIE VGA Card First]

iGPU Frame Buffer Size

Default: [256MB] / Options: [256MB]

High Definition Audio

This item allows you to enable or disable High Definition Audio.
Default: [Enabled] / Options: [Disabled] [Enabled]

Onboard LAN Settings

This item allows you to enable or disable the Onboard LAN settings.
Default: [Enabled] / Options: [Disabled] [Enabled]

PXE rom boot support

This item allows you to enable or disable PXE rom boot support.

Default: [Disabled] / Options: [Disabled] [Enabled]

Summary of Contents for IPX7A-ION

































Reviews:

No comments

Brands by name

Popular brands

Load more brands