manualshive.com logo in svg

OEM IPX7A-ION, Reference Manual

Share
Download
OEM IPX7A-ION Reference Manual Download Page 16

16

IPX7A-ION Motherboard Reference Guide

7  Connectors

Front panel audio connector

This connector is for a chassis-mounted front panel audio I/O module that supports HD 

Audio.

NOTE:  It is recommended that you connect a high-definition front panel 

audio module to this connector to utilize this motherboard’s high-definition 

audio capability.

USB connectors (dual ports)

These connectors are for USB 2.0 ports. Connect a USB module cable to any 

of these connectors, then install the module to a slot opening at the back of the 

system chassis. These USB connectors comply with USB 2.0 specifications which 

support up to 480 Mbps connection speed. 

WARNING: Never connect a 1394 cable to the USB connectors. Doing so 

will damage the motherboard!

USB*(-)

USB*(+)

USB*(+)

USB*(-)

Ground

Ground

SBV

SBV

NC

F_USB1

F_USB2

MIC*_L

MIC*_R

LINE*_R

Ground

Ground

LINE*_L

JD_LINE

*

JD_MIC

*

FP_PRES#

F_AUDIO

Summary of Contents for IPX7A-ION

































Reviews:

No comments

Brands by name

Popular brands

Load more brands