background image

ENGRAVER

08/16

2016 OEMTOOLS

®

Operating Instructions and Parts Manual 

24668

The following safety information is provided as a guideline to help you operate your Engraver under the safest possible conditions.  Any tool or piece of equipment 

can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety instructions are to provide 

the user with the information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your tool. Failure to 

follow instructions listed below may result in serious injury. In addition, make certain that anyone who uses the equipment understands and follows these safety 

instructions as well.

WARNING

Explanation of Safety Signal Words

 WARNING

:  Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

 CAUTION

:  Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION

:  Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTES

: Provide clarity and helpful information.

Thank you very much for choosing an OEMTOOLS

®

 Product!

For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using 

it. This product is designed for certain applications only. OEMTOOLS

®

 cannot be responsible for issues arising from modification. We strongly recommend this 

product is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO 

NOT use the product until you have first contacted customer service to determine if it can or should be performed on the product. 

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing 

all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. 

Please retain instructions for future reference.

UNPACKING

After unpacking unit, inspect carefully for any damage that may have 

occurred during transit. Check for loose, missing, or damaged parts. If 

any damage is observed, a shipping damage claim must be filed with 

carrier. Do not use the OEMTOOLS

®

 Engraver if broken, bent, cracked or 

damaged parts (including labels) are noted. Any Engraver that appears 

damaged in any way, operates abnormally or is missing parts should be 

removed from service immediately. If you suspect that the Engraver was 

subjected to shock load (a load that was dropped suddenly, unexpectedly, 

etc.) immediately discontinue use until it has been checked by a factory 

authorized service center.

FOR CUSTOMER SERVICE

Technical Question?

 

CALL 1-866-458-2472

[email protected]

Reviews: