5
Operating Instructions and Parts Manual
24667
11/18
2018 OEMTOOLS
™
4V MAX* LITHIUM-ION
CORDLESS SCREWDRIVER
WARNING
:
DO NOT attempt to modify tools or create accessories.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
injury. It will also void the warranty.
LUBRICATION
All of the bearings in this tool are lubricated with a
sufficient amount of high-grade lubricant for the life of
the unit under normal conditions. Therefore, no further
lubrication is required.
BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
To preserve our natural resources, please recycle or
dispose of batteries properly.
This product contains lithium-ion batteries. Never dispose of
lithium-ion batteries in normal household garbage or in landfill
sites as they will add to the pollution of the environment.
Consult the local waste authority for information regarding
available recycling and disposal options.
WARNING
: Upon removal of the battery, cover the
terminals of the battery with electrical or heavy-duty
adhesive tape. Never touch both terminals with metal
objects or body parts as a short circuit may result. Keep
away from children. DO NOT attempt to destroy or
disassemble battery or remove any of its components.
Lithium-ion batteries must be recycled or disposed of
properly. Failure to comply with these warnings could
result in fire and serious injury.
BATTERY MAINTENANCE
For power, long operational life and light weight, this tool
is powered by a lithium-ion battery.
These lithium-ion batteries are powerful, rugged and will
provide hundreds of charge/discharge cycles if properly
maintained.
NOTE
: Never remove the battery in order to use it for any
other purpose. This will void the warranty.
HOW TO CARE FOR THE LITHIUM-ION BATTERY:
1. DO NOT use the Cordless Screwdriver at temperatures
below –10° C (14°F).
2. Never allow a battery to freeze.
3. DO NOT charge a battery that has been stored at or
below 0° C (32°F) or above 40°C (104° F). Allow it to sit at
room temperature for at least 30 minutes before charging.
4. DO NOT charge the battery if the tool seems warm
to the touch.
5. To protect the battery, this tool is equipped with a
battery monitor circuit. When the battery voltage
reaches the minimum manufacturer’s recommended
voltage, it interrupts the power to the tool, signaling
that the battery should be charged.
6. At very low temperatures, battery output is severely
reduced. However, it is safe to use the tool, as its output
will increase to normal levels due to self-generated heat.
ELECTRICAL WARNING
:
POWER SOURCE CONNECTION
POWER REQUIREMENTS
This product is designed to operate on a properly grounded
120 Volt, 60Hz, single-phase alternating current (AC)
power source fused with a time-delayed fuse or circuit
breaker. It is recommended that a qualified electrician
verify the ACTUAL VOLTAGE at the receptacle into
which the product will be plugged and confirm that the
receptacle is properly fused and grounded.
DO NOT OPERATE THIS PRODUCT if the ACTUAL
power source voltage is less than 105 volts AC or greater
than 132 volts AC. Contact a qualified electrician if this
problem exists. Improper performance and/or damage
to the product will result if operated on inadequate or
excessive power.
DO NOT abuse cord. Never use the cord to carry tools or pull
the plug from an outlet. Keep cord away from heat, sharp
edges or moving parts. Replace damaged cords immediately.
Damaged cords increase the risk of electric shock.
This symbol designates that this tool is listed with the
U.S. requirements by ETL Testing Laboratories, Inc. and
conforms to UL Std. 60745-1, 60745-2-1 and 60745-2-2.
Intertek
3042597
JD501004
