4
Operating Instructions and Parts Manual
24385
USB VIDEO BORESCOPE
Figure
Description
1
LED brightness control
2
Snapshot button
3
Handle
4
Watertight Flexible Shaft (60 cm)
5
Camera head with LEDs
6
Accessory tools: hook, magnet
NOTE
Not all components of the Video Borescope are
replacement items, but are illustrated as a convenient
reference for location and position in the assembly
sequence.
ATTACHING TOOLS
Slide the plastic clamp of the tool over the narrow part
of the camera head until it snaps into place.
Attach the magnetic top to the camera to pick up small
metal pieces from difficult to reach locations.
Attach the hook to retract wires or other small objects.
(6)
07/14
2014 ©OEM-TOOLS
Always wear safety glasses and gloves!
OPERATING INSTRUCTIONS
• Never insert probe into a space known or suspected to contain live electric wiring.
• The Video Borescope is intended for industrial applications only. Do not use it for personal or medical use in any
way.
• Never insert an attached probe into any flammable gas or liquid including in any storage container or fuel tank
designed to store flammable gas or liquid.
• Do Not disassemble the instrument. Doing so creates a potentially fatal electrical hazard (and voids the warranty
as well).
• Do Not expose the tool to rain or wet conditions. Water entering the tool will increase the risk of electric shock.
• Keep cord away from heat, oil, sharp edges or moving parts.
WARNING
WARNING
(1)
(2)
(3)
(4)
(5)
