Installation
Install your charger safely on a plane surface near a socket (power
supply).
•
Connect the antenna to the
terminal (CHARGER only).
•
With light pressure turn the
plug to the right until the
antenna is properly locked.
•
Connect the low voltage plug
of the power adapter properly
into the socket of the charger.
•
Connect the charger to an
easily accessible main
socket.
•
Charge indicator lamp flashes
(green, 30s).
Receiving messages while charging
When the pager is inside the charger the alert mode changes
automatically to audible alert (vibrator turned off).
Incoming alert messages (CHARGER only)
If the pager receives a message while charging, the charger's alert
signal (red) will flash and any external alarm that is connected to
the charger will set off.
½
red intermittent light
Stopping an alert (CHARGER only)
Press the charger's button once to stop an ongoing alert.
1
2
