PAGER LX4
USER MANUAL
© 2022 Oelmann Elektronik GmbH
18 / 25
– Belt holster
– Leather / nylon case
– Carrying chain / bungee cord
– Desktop charging cradle, Rod Antenna, Alert Siren
– Data cradle (Adapter with serial data interface)
– Programming kit (Adapter and PC Software)
RE-ROUTING RECEIVED MESSAGES
After choosing the Message route symbol
·
in the function menu you can re-route
any received message to a PC, printer or large size display via optional data cradle
(desktop pager adapter with serial data interface).
PAGER DEACTIVATED FUNCTION
In case your pager displays
PAGER PROTECT
then it cannot receive messages
any longer because it was set to a remote maintenance condition by the paging sys-
tem’s transmitter ”over the air”.
LOW BATTERY ALERT
When the battery voltage drops, the symbol
9
(battery warning level 1) is dis-
played. Whenever the symbol
=
(battery warning level 2) is displayed, the battery
must be charged or replaced to the fully charged one very soon (backlight turns off
automatically).
When the battery voltage reaches one of the warning levels the pager emits a low
battery alert. If you do not recognize the alert (you do not press any button) there will
be a repetition in regular intervals and the symbol
9
or
=
flashes.
BATTERY REPLACEMENT
To install or replace the battery, place the pager face down, then:
1. Unlock the battery cover by sliding
the cover latch up with your thumb.
2. Slide the battery cover to the right.
3. Remove the battery cover.
4. Install the battery.
5. Close the battery compartment cover.
