PAGER LX4
USER MANUAL
© 2022 Oelmann Elektronik GmbH
16 / 25
If an alarm has been set the clock alarm Indicator
Ã
is displayed in the pager status
line. At the selected time, your pager vibrates or emits an audible alert. If you do not
recognize the alert (you do not press any button) there will be a repetition in regular
intervals and the time and the alarm symbol
Ã
flashes.
SETTING THE MESSAGE ALERT MODE
You can choose one out of four different message alert modes:
LOUD+VIBRATION
.......audible plus vibration
LOUD
.................................audible without vibration
GENTLE
............................starts with low sound level
SILENT
............................vibration only
1. Select alert mode
©
in the function menu and press the Function Button
◊
2. Now select the wanted Alert Mode with
⁄
or
Ÿ
button. The selected Alert Mode
flashes, your pager emits a short alert according to the chosen Alert Mode. To es-
cape without making changes, press
’
3. Confirm your selection by pressing the
◊
button. Your pager emits a short alert
according to the chosen Alert Mode.
Hint: The chosen Alert Mode is displayed in pager status line.
SETTING THE MESSAGE ALERT PATTERN
You can choose the alert pattern that shall be audible when a message is received.
1. Select alert pattern
®
in the function menu and press the Function Button
◊
2. Using the buttons
⁄
or
Ÿ
choose the alert pattern you like most. The chosen pat-
tern plays and flashes:
1..16
........ standard alert pattern
©
.................. special pager alert pattern
®
.................. pattern fixed by programming
To escape without making changes, press
’
3. Confirm your selection by pressing the button
◊
. The selected alert plays through
the internal speaker.
SELECTING THE PAGER NUMBER PROFILE
The pager can have up to sixteen different user profiles. Every profile is a set of
1…64 pager numbers (RICs). Every address have up to 4 prefixes (so called Cap-
code as A,B,C,D). Pager numbers and profiles are pre-programmed prior to issuing
the pager to the end user.
1. Select user profile
)
in the function menu and press the Function Button
◊
