B
Customer Guide
Please read and understand the notes below to enable correct operation
of the device.
Light Status
Turn on the vehicle ignition and wait for the device to power up:
If the RED light is constant ON and the BLUE light flashes, the device is
working normally.
If the RED and Blue light flash quickly at the same time, the device is in
emergency recording mode.
If RED light flashes and BLUE light is constant ON, the device has no memory
card or cannot detect a memory card.
If the RED light flashes quickly and the BLUE light flashes slowly, the
device has malfunctioned or crashed. Please switch power off and then
restart to perform system reset.
After the restart and reset procedure is complete please ensure that
the device is working correctly with RED light constant ON and BLUE
light flashing.
After the power is turned off please ensure the lights on the device are
also turned off to confirm the DVR is automatically turned off.
Memory Card
The user is advised to format the memory card used in the device regularly.
Format can be performed by Cellphone via the OE Witness dedicated
App or alternatively by computer. This will ensure the memory card is
kept in good working order and clear any memory chips which can affect
its long term performance capability.
It is advised that a high speed Class 10 memory card is used in conjunction
with this device, if upgraded or replaced. This product is supplied with a
16GB Class 10 Memory card.
Device Voice Prompt
On first time start up the device will give the voice prompt “please
synchronize the time with cellphone”.
If the device is not connected to a cellphone on start up the device will
give the voice prompt “please synchronize the time with cellphone”.
If the device is connected to a cellphone and the memory card is formatted
then there will be no voice prompt on the next start up.
I
f the device detects no memory card or abnormal reading of the memory
card the device will give the voice prompt “please insert SD card”. If
the memory card is 95% full the device will give the voice prompt “please
change SD card”.
If the SSID and password have been changed and are then forgotten, the
user can remove the memory card and press the button at the same
time to reset the SSID and password to default.
6
