Pairing your drone unit
to the remote control.
After you’ve fully charged your drone and properly installed the batteries in
your controller, you’re ready to use your Wild FX. Before each use, you must
pair the drone with the controller so they can communicate with each other.
2. Turn on the controller. It will beep
once. Move the throttle throttle (the
left-hand stick in default mode) stick
up to the 12 o”clock position.
3. Then move the throttle all the way
down to the six o’clock position. The
controller’s and the drone’s lights
will stop flashing and show a steady
light, indicating a successful pairing.
Note: After "Step 3," be patient. It may take up to 7 seconds for
the lights to stop flashing, confirming a successful pairing.
1. Turn on the drone and place it on a flat surface.
2. Its indicator lights will flash.
(NOTE: You will need to re-pair the units after each flight or after the units are turned off.)
1
2
3
10
11
