1. Locate the charging slot just below the ON/OFF switch of the Quadcopter and
carefully plug in the small end of the charging cord. The small tab below the
connector should be on the bottom.
2. Connect the USB end of the Charging Cable to a computer or to a smart phone
charger, but use only the st5 +0.5V USB chargers. While charging, the
red LED inside the USB casing will illuminate. When the Quadcopter is fully
charged, the light will go out. To prevent damage, remove the Charging Cord from
the Quadcopter as soon as the charging light goes out.
Charging the Drone
CAUTION
NOTICE
When charging through the included USB cable: The red LED light
illuminates to show the battery is charging. The red LED light goes
out to indicate charging is complete. Remove the charger from the
USB charger or computer immediately.
The battery usually comes with a partial charge from the factory. It
is recommended to use the WildFX Quadcopter Drone and
completely discharge the battery before charging for the first time.
DO NOT OVERCHARGE THE BATTERY TO AVOID OVERHEATING
AND DAMAGE TO THE RECHARGEABLE BATTERY!
ALWAYS CHARGE UNDER ADULT SUPERVISION!
4
5
