All dimensions in mm. All figures are illustrations of photos. Changes reserved
17
Adjustment of the Crimp Tongs 080.000.037.000.000 and 080.000.038.000.000
Please fasten the Positionier under consideration
of the guiding into the tong.
080.000.037:
Therby push the positionier down and turn it
clockwise at the same time.
080.000.038:
You don´t have to do this with this tong.
080.000.037:
To fix the positionier in this position, you have to
use the attached safety pin.
080.000038:
Here you have to fix the positionier with some
attached allen screw and the suitable spanner.
Please turn the adjustment wheel onto the right
position. If the adjustment is done, so please fix
the wheel with the attached safety pin.
Now the tong is ready adjusted. You can start
with the crimp process.
ODU MAC LC – Crimp Information
Required Tools:
Positionier
Crimp Tong
1. Fasten the Positionier on the Crimp Tong
2. Adjust of the Crimp Tong for the cable cross section
