11
REMOTE CONTROL
6.5 Other limit position setting
(if there’s no action within 30 s, the motor will exit from limit posi-
tion preparation automatically)
Move the motor
to the desired
position.
Press the rear
PROG for 1 s.
Motor jogs once,
and enters into limit
setting preparation.
Press the rear PROG
for 1 s to store the
limit position.
Motor jogs once
and the limit set-
ting is
fi
nished.
6.6 Limit position
fi
ne-tuning
(if there’s no action within 30 s, the motor will exit from limit posi-
tion preparation automatically)
When motor
has run to
the desired
fi
ne-tune limit
Press the rear
PROG 1 s to
enter into set-
ting mode
The motor jogs
once and enters
into limit setting
preparation
Adjust to the
desired posi-
tion.
Press the rear
PROG for 1 s to
store the limit
position.
Motor jogs
once and the
fi
ne-tune set-
ting is
fi
nished.
6.7 Delete a limit position
(if there’s no action within 30 s, the motor will exit from limit position
preparation automatically)
When the motor
has run to the
limit position to
be deleted.
Press the rear
PROG 7 s to enter
into setting mode.
The motor jogs once
and enters into limit
setting preparation.
The motor runs for 7
seconds and the pre-
set limit position has
now been deleted
.
6.8 Dot move and continouous move convertion
Press “Stop” on the
programmed remote
control for 5 s.
The motor jogs
once.
Press the “Stop”-
button.
Motor jogs once
to con
fi
rm the
convertion.
6.9 Add new remote control
Press “Stop” on the
programmed remote
control for 5 s.
The motor jogs
once.
Press the “Up”-
button on the new
remote control.
Motor jogs once, and
new remote control has
now been programmed.
