Operating Instructions
1. Remove optional filter from back of unit and insert ceramic plates.
Reinstall filter. Plug unit into a grounded wall outlet.
2. Close all outside doors and windows of the area to be treated. Make sure
inside doors, such as bathroom and closet doors, are open.
3. If the space to be treated has a central heating or cooling system, turn the
fan setting to “On” to gently circulate the air while the space is
being treated. If not, a fan should be used instead.
4. Make certain all people and animals have been removed from the area.
5. The Ozone Output level should be set at “Medium” to “High” depending
on the level of odors and amount of time available for treatment.
6. Set timer to desired treatment time and then leave the area!
7. Upon re-entry to the treated area, make sure timer dial is in the
“Off” position.
8. Allow at least one hour after treatment is finished before re-occupying the
space. Open windows and doors upon re-entry.
Note: A higher Ozone Output setting will sanitize the space more quickly. The amount of time
necessary to eliminate pollutants depends on how entrenched the odors are. The effect of
ozone will vary depending on environmental conditions such as the size of the space and
the severity of the odors. Temperatures below 70˚F or high humidity levels may reduce ozone
effectiveness. A dehumidifier may be used in conjunction with the ozone generator.
Variable Control for
Ozone Output
Timer with
Hold Function
Power On Indicator Light
3
FOR USE IN UNOCCUPIED
SPACES ONLY!