The Control Panel
1) Main Power Switch – Turns power on to the Decon Scrubber. This switch must be in the “ON”
position before trying to control the “FAN SPEED” or “PROCESSOR” switches.
2) Fan Speed Switch – Controls the speed of the fan and airflow through the system.
3) Processor Switch – OFF/LOW/HIGH. This switch controls the number of hydroxyl generating
optics in operation.
4) Hour Meter – Quartz non-reversible indicator of accumulated hours of use.
5) Minihelic Gauge – Gauge which senses the static pressure through the 4 inch filter. Used to indi-
cate when it is time to replace the 4 inch filter.
6) Processor Indicator (Green) – Indicates that the hydroxyl generating optics are on.
7) 15 Amp Breaker – AC power circuit protection for the Decon Scrubber.
8) 2 Amp Breaker – AC power circuit protection for the optic circuit.
ENGLISH
OPERATING THE DECON SCRUBBER
2