
2 Inch Pre-Filters
Step 1
- Turn “Main Power” switch to the “OFF” position
Step 2
- Unplug power cord from 120 volt receptacle
* NOTE - Use caution to pull from the plug and not from the cord
Step 3
- Remove the Phillips (Star) screw located at the top of the pre-filter door (or push and turn the
phillips (Star) quarter turn fastener counter clockwise)
Step 4
- Pull the top of the pre-filter door out and lift off
Step 5
- Remove 2 inch filter
Step 6
- Install new 2 inch filter
* NOTE - Ensure proper filter direction with reinforcing mesh facing the inside of the unit
Step 7
- Reinstall the pre-filter door by first installing the tab portion of the door into the bottom of the
opening
ENGLISH
FILTER REPLACEMENT INSTRUCTIONS
11