Page
11
of
14
2.7
Open Microsoft HyperTerminal. From the START menu select ACCESSORIES, then COMMUNICATIONS then
HYPERTERMINAL.
2.8
Default Telnet Program window may open, Select NO.
2.9
The HyperTerminal window will open along with a new connection window.
2.10
Enter a name for the set up file like RP460setup then select OK.
2.11
A Connect to window will open.
2.12
Go to the Connect Using: box and Left click on the down arrow to open the list, select the com port from 5.2.
2.13
COMx Properties window will open set the following:
Bits per second 9600
Data bits 8
Parity None
Stop bits 1
Flow control None
2.14
Select Apply then OK.
2.15
In The lower left hand Conner of the HyperTerminal window it should say connected with counting seconds.
HyperTerminal is connected to the RP460 and ready to capture the file download.
2.16
Left click “Transfer”, from the menu on the top of the HyperTerminal window.
2.17
From the drop down menu select Capture Txt…
2.18
A Capture Text window will open.
