RTP Bridge User’s Guide
27(36)
c.
Alvis Board #1 should be one of the following OTX boards:
Alvis-4-CSI
Alvis-8-CSI
Alvis-ASM
d.
Alvis Board #2 should be one of the following OTX boards:
a.
Alvis-2-CSI
b.
Alvis-4-CSI
c.
Alvis-4M-CSI
d.
Alvis-8-CSI
e.
Alvis-8M-CSI
f.
Alvis-ASM
g.
Alvis-PCIe
h.
Alvis-2-PBX
5.
Update the rpm repository packets list at Alvis Board #2:
apt-get update
6.
Install RTP Bridge package at Alvis Board #2 with a command:
apt-get install rtpbridge
7.
Reset Linux file buffers at Alvis Board #2 with a command:
sync
8.
Run RTP Bridge at Alvis Board #2 with the command:
/opt/rtpbridge/rtpbridge
If you will get a “No license found” message please follow the instructions in
Chapter 9 - The RTP Bridge License.
9.
In CLI of RTP Bridge at Alvis Board #2 issue the command:
connect rtp:10.0.1.2:5002:6002 rtp:10.0.1.2:5004:6004:g711u
where 10.0.1.2 is the IP-address of the Alvis Board #1.
10.
Update the rpm repository packets list at Alvis Board #1:
apt-get update
Doc. No. 1412-1-SAA-1020-1
www.odints.com
Rev. 1.9
Copyright © Odin TeleSystems Inc., 2010