Doc. No. 1512-1-HAA-1003-1-2.0
Rev. 1.0 (Released)
November 8, 1997
Copyright (C) Odin TeleSystems Inc., 1997
5(15)
Balder-8S 2.0 Installation Guide
PC Requirements
4. PC Requirements
It is recommended that Balder-8S be used in a PC which satisfies the following
requirements:
•
Industry Standard Architecture (ISA) Bus with at least one free 16-bit slot.
•
An Intel 80486 processor. A Pentium or Pentium Pro processor is recommended.
•
1 Free IRQ (3 - 15)
•
At least 32 Free I/O -addresses
5. Configuring Balder-8S
5.1 Handling Instructions
The Balder-8S board has been packaged in a sealed anti-static bag for protection dur-
ing shipping and handling. Follow precautions regarding handling of electrical equip-
ment while configuring the board and while installing it into a PC expansion slot. Be
aware of the possibility of damage to the sensitive electrical devices on Balder-8S
from static electricity discharge. Please wear anti-static protection devices such as a
ground strap connected to a grounded equipment frame while handling the Balder-
8S board. To configure the board, remove it from the anti-static bag and place it on to
a flat and properly grounded anti-static mat.
