- 77 -
cable.
Break-in
The first month is most important in the life
of your vehicle. Proper operation during this
break-in period will help ensure maximum
life and performance from your new vehicle.
The following guidelines explain proper
break-in procedures.
1. After the engine starts, the engine
should not go above 5000rpm for the
first 20 hours.
2. Drive vehicle slowly, do not accelerate
quickly for the first 20 hours.
3. Avoid slamming the brakes.
4. Do not exceed the vehicle speed on the
below schedule.
Starting and Operating Instructions
● Before starting the engine, be sure that
the driver is seated properly in the UTV
and tighten the seat belts.
●
Test the UTV in an open area at the
beginning to learn how to start, turn and
stop.
● Operate the UTV slowly until you become
familiar with it. The turning radius on this
vehicle is very small, so the centrifugal
force is very high when turning at a high
speed. Slow down around corners or
turns to reduce the risk of overturning
your UTV.
Summary of Contents for Raider
