oddWires IoT-Bus, Documentation

Page: 115 / 165

CHAPTER
34
IoT-Bus Window and Door Sensor Thing
#include <Arduino.h>
#include <Thing.h>
#include <WebThingAdapter.h>
/*
Simple binary sensor example using ESP32 capacitive touch input
This example code is in the public domain.
*/
//TODO: Hardcode your wifi credentials here (and keep it private)
const char
*
ssid = "........" ;
const char
*
password = "........" ;
// Uses a window/door sensor and turns on a LED when open
int ledPin = 5 ; // choose the pin for the LED
int sensorPin = 4 ; // choose the input pin - we'll use a pullup on this pin to keep
˓ →
high
// Connect one end of the door switch to this pin.
// Connect the other end to GND
WebThingAdapter
*
adapter;
const char
*
sensorTypes[] = { "binarySensor" , nullptr };
ThingDevice sensor ( "DoorSensor" , "Window/Door Sensor" , sensorTypes);
ThingProperty openProperty ( "Sensor Open" , "" , BOOLEAN, "OpenProperty" , "Door" , "" ,
˓
→
false );
ThingPropertyValue sensorValue;
void setup () {
Serial.begin( 115200 );
// Start WiFi
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
(continues on next page)
111