oddWires IoT-Bus, Documentation

Page: 111 / 165

iot-bus Documentation, Release latest
(continued from previous page)
// background
tft.fillScreen(ILI9341_MOZCYAN); // closest 16 bit color to MOZ IOT
// draw initial state
drawPlug( false );
// start the touch screen
ts.begin();
// Initialize MOZ IoT thing
adapter = new WebThingAdapter( "adapter" , WiFi.localIP());
relay.addProperty( & relayOn);
adapter -> addDevice( & relay);
adapter -> begin();
Serial.println( "HTTP server started" );
Serial.print( "http://" );
Serial.print(WiFi.localIP());
Serial.print( "/things/" );
Serial.println(relay.id);
}
ThingPropertyValue value;
void loop () {
bool on = relayOn.getValue().boolean;
if (touched( true )){
on = ! on; // invert status
lastOn = ! on; // invert status
value.boolean = on;
relayOn.setValue(value);
delay( 300 ); // avoid touch bounce
}
// update status
adapter -> update();
on = relayOn.getValue().boolean;
digitalWrite(relayPin, on ? HIGH : LOW); // active high
if (on != lastOn) {
Serial.print(relay.id);
Serial.print( ": " );
Serial.println(on);
drawPlug(on);
}
lastOn = on;
}
// helper to draw the plug state on/off
void drawPlug ( bool on = false ){
#define RADIUS 110
#define SOCKET_WIDTH 24
#define SOCKET_HEIGHT 40
#define SOCKET_RADIUS 10
#define LEFT_SOCKET_X 108
#define LEFT_SOCKET_Y 55
#define RIGHT_SOCKET_X 185
#define RIGHT_SOCKET_Y 55
#define BOTTOM_SOCKET_X 147
(continues on next page)
107