3. Drill holes in the wall.
5. Install stopper with screw on the
wall.
1. Rivet the base onto the nut
with fixing screw.
7. Pass the supply cable through
the tube provided for this
purpose and pass the wire
through the plate.
4. Insert screw anchor into the holes.
6. Cut the supply cable. Make
sure you keep enough
wire to go through the tube and
to plug into the junction box.
Remove the already existing
tube to replace it with the one
provided in the box of the
hardwire installation.
2. Identify the location of the holes
needed to screw the product on
the wall .
Hardwire
installation
instructions