3. Drill holes in the wall.
5. Install stopper with screw
on the wall.
1. Rivet the base onto the nut
with fixing screw.
7. Rivet the puller bolt
with the fixed stopper through
allen key.
4. Insert screw anchor into the holes.
8. Press the button to turn the device
ON or OFF. Select the drying time
from 1 hour to 8 hours.
Select the drying temperature
between 30° and 60 degrees Celsius
(86 to 140 °F).
6. The supply cable should exit at
the back part of the product.
2. Identify the location of the
holes needed to screw the product
on the wall.
Plug-in
installation
instructions