OCULUS ImageCam 3, Instruction Manual

Page: 49 / 76

12 Patient Data Management
Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01) 43 / 68
12 Patient Data Management
Once you have completed an examination you can do the following with
the patient data:

Rename it, sect. 12.1, page 43

Export it, sect. 12.2, page 43

Import it, sect. 12.3, page 44

Save it, sect. 12.4, page 46
You can also change the settings for the Patient Data Management
system,
sect. 12.5, page 48 .
12.1 Rename Patient Data
Patient data can be changed retroactively after it has been added.

Press the [Change] button.
The input boxes for patient data are now enabled, and the cursor
jumps to the “Last name” field.

Change the entries in the individual boxes.

Press the [Save] button.
12.2 Exporting Patient Data
Patient and examination data can be exported, for example, for
forwarding to another clinic.

Select the patient and also one of the examinations in the respective
list as required.

Press the [Export] button below the patient list. The following dialog
is displayed:
☞
The default options for import and export of data are configured in the
“Settings” field, see also
sect. 12.5, page 48 .
Depending on the settings, you may not have to perform all of the
1 Saving destination selec-
tion 2 [...] button
3 [Cancel] and [Export] buttons
Fig. 12-1: “Export patient data” dialog
1
2
3