OCULUS ImageCam 3, Instruction Manual

Page: 50 / 76

12 Patient Data Management
44 / 68 Instruction Manual ImageCam® 3 (G/69200/XXXX/EN 0120 Rev01)
following steps (e.g. selection of the directory).

Select the “Target” (1) where you would like to export the data to.
☞
Recommendation: Use the option “Single file (U12)” to export the patient
data.

Press the [...] button (2).

In the dialog that appears, select the folder or the file to which the
patient data should be exported.

Confirm your selection with [OK] or [Open].

To export the data, press the [Export] button (3).
12.3 Import Patient Data
If you receive patient data, for example, on a USB stick, you can import
these data.
Note
Risk of loss of data due to computer viruses
Computer viruses can cause loss of data.

Run a virus check before importing data from the USB flash drive.