13
USER MANUAL
Installing the robot
No installation is needed to start the robot.
Using the robot
Do not use a live electric fence on the floor where the robot operates.
This may cause major damage.
The T-Moov robot moves autonomously at random. In order to start the robot, put it into the
chosen coop and turn it on.
POWER ON/OFF
To turn the robot on, press the ON/OFF switch located on its rear. If a light does not turn on, the robot’s
battery isn’t charged. If it’s not, plug the included charger into the robot (see section: “Recharging the
Robot”)
STARTING AND PAUSING THE ROBOT
After turning on the robot, press the FORWARD/STOP button located under the shell cover to start the
robot, which will then move at the selected speed and settings.
When the robot is first placed among the poultry, it is highly recommended to select speed 1
(see section: Using the Control Panel).
STOPPING THE ROBOT
To stop the robot, press the START button located under the shell cover, or shut off the power supply by pressing the
ON/OFF switch.
When you remove the robot from the coop, remember to turn it OFF before carrying it.
Summary of Contents for T-MOOV
