Enhanced phone functions
39
Step by Step
Transferring a call after a speaker call
announcement in a group
If this function has been configured (contact your service personnel),
you can use a speaker call (announcement,
Page 60) to an-
nounce a call in progress to a group of users
After a member of the group has accepted the call request, you can
transfer the waiting party.
Prerequisite: You are conducting a call.
S
Press the "Consult" key. The LED flashes.
)80
Enter the code.
j
Enter the group’s station number.
[
Announce the call.
You are connected to a member of the group when this party accepts
the call.
\
Replace the handset.
Send trunk flash
To activate ISDN-type services and features through the network car-
rier’s analog trunks or those of other communications platforms
(such as "consultation hold"), you must send a signal to the trunks be-
fore dialing the service code or telephone number.
Prerequisite: You have set up an external connection via an analog
line.
S
Press the "Consult" key. The LED flashes.
)51
Enter the code.
j
Enter the service code and/or telephone number.
If the connection between the two other parties is not estab-
lished within 45 seconds, the call from the first part returns to
you (recall).
