Octopus F200 Operating Instructions Manual Download Page 73

Page: 73 / 131

Saving functions, procedures and appointments

Step by Step

Repdial key (Internal), Direct station select:

Party not on a call.

Party is on a call or has activated DND.

Flashing quickly, I’m being called, please accept.

Flashes slowly - another party is being called and has not yet an-

swered.

Mailbox:

There are no messages.

There are messages.

Call key, General call key, Trunk key, MULAP Key, Temporary

MSN:

No call via the corresponding trunk.

Active call via the corresponding trunk.

Flashing quickly, call via the corresponding trunk, call acceptance

possible, press key.

Flashing slowly, call via the corresponding trunk is being held.

Trunk group key

At least one trunk is free.

All trunks of the trunk group are occupied.

View call charges:

There are been no calls subject to costs since the last check.

There are been calls subject to costs since the last check.

Call forwarding, Forward Line:

Flashing slowly, you are the destination of call forwarding or your

trunk is the destination of call forwarding.

Fax details

No fax received or no message on the answering machine.

Fax received or message on the answering machine.

Summary of Contents for F200




































































































































Search results

Summary of Contents for F200

Reviews:

Related manuals for F200

Brands by name

Popular brands

Octopus F200, Operating Instructions Manual

Search results

Summary of Contents for F200

Reviews:

Related manuals for F200

Brands by name

Popular brands