Octopus F IP-Netpackage Operating Instructions Manual Download

Page: 67 / 103

More functions/services

Step by Step

Leaving an advisory message

You can leave messages/advisory messages on your phone’s display

for internal callers that wish to contact you in your absence.

When you receive a call, the message appears on the caller’s display.

Open the idle menu

Page 17.

Select and confirm the option shown.

Select predefined text (can be changed by service personnel) and

confirm.

...

Enter the code directly.

The code is shown on your display with the corresponding message.

Select and confirm the option shown.

Enter message (up to 24 characters)

Page 15.

Confirm.

Deleting advisory messages

Open the idle menu

Page 17.

Select and confirm the option shown.

Advisory msg. on

0=Will return at:

Predefined messages with a colon can be completed by en-

tering a digit.

Enter message text?

Save?

Advisory msg. off?

Summary of Contents for F IP-Netpackage








































































































Search results

Summary of Contents for F IP-Netpackage

Reviews:

Related manuals for F IP-Netpackage

Brands by name

Popular brands

Octopus F IP-Netpackage, Operating Instructions Manual

Search results

Summary of Contents for F IP-Netpackage

Reviews:

Related manuals for F IP-Netpackage

Brands by name

Popular brands