Page 10
Copyright© 2011 Octet Matrix Audio
correctly without audio dropouts or crackling. If the system does exhibit any of these
problems, use the troubleshooting charts to resolve the issue before continuing.
Component Installation
You are now ready to permanently mount the system components. If you will be mounting to
walls, try to screw into wooden studs. If you can’t locate studs suitable for your installation,
use wall anchors capable of holding the weight of the component. If you don’t have a stud
finder, mark the desired location and drill a test hole with a drill the same diameter as the
screw body. If you hit a wood stud, then use the holes and screw directly into the stud. If you
don’t hit wood, drill out the same holes with a drill diameter suitable for wall anchors that
will hold the component weight and screw into those.
