2
Hardware Installation
15
2.4 Jumper Settings for Selecting the CPU Type
CPU Type Select - Jumper JP7
This jumper is used to select the type
of processor (Intel
®
or VIA Cyrix
®
III)
installed on the system board.
1-2 On:
Intel
®
CPU
(default)
2-3 On:
VIA Cyrix
®
III CPU
Important:
The frequency ratio of some processors shown in the table
may have been locked by the manufacturer. If you are using
this kind of processor, setting an extended ratio for the
processor (using SW1) will have no effect. The system will
instead use its factory default ratio.
The frequency ratio of processors greater than 8x has been
locked by the manufacturer and will no longer have the
flexibility of using extended ratios. Therefore, the system will
use the processors factory default ratio.
The processors supported by the system board support
VID (Voltage Identification). The switching voltage regulator
on the system board will automatically set the voltage
regulator according to the voltage of the processor.
