Appendix-C Hardware Settings
RHINO 5 User’s Manual
32
C.3
Jumper Settings
All factory settings are marked by * in the following
sections.
C.3.1 CPU related settings
Header 7 setting
The factory settings are as follows:
P8 (7-9)
P8 (8-10)
P8 (11-13)
P8 (12-14)
The four pieces of shunt connectors are to be left in factory
setting. This configuration works well with all Pentium
CPUs P54C, P54CQS and P54CS.
For P55C CPU, the processor will be used in connection
with an Voltage Regulator Module (VRM). All the four
shunt connectors installed in P8 should be removed. An
VRM should be plugged in P8 instead.
